61 research outputs found
Microstructuring of Steel and Hard Metal using Femtosecond Laser Pulses
AbstractNew results on three-dimensional micro-structuring of tungsten carbide hard metal and steel using femtosecond laser pulses will be presented. For the investigations, a largely automated high-precision fs-laser micromachining station was used. The fs-laser beam is focused onto the sample surface using different objectives. The investigations of the ablation behaviour of the various materials in dependence of the laser processing parameters will be presented. In the second part, complex 3D microstructures with a variety of geometries and resolutions down to a few micrometers will be presented. On of the Goal of these investigations was to create defined microstructures in tooling equipments such as cutting inserts
Dynamic Power Management for Neuromorphic Many-Core Systems
This work presents a dynamic power management architecture for neuromorphic
many core systems such as SpiNNaker. A fast dynamic voltage and frequency
scaling (DVFS) technique is presented which allows the processing elements (PE)
to change their supply voltage and clock frequency individually and
autonomously within less than 100 ns. This is employed by the neuromorphic
simulation software flow, which defines the performance level (PL) of the PE
based on the actual workload within each simulation cycle. A test chip in 28 nm
SLP CMOS technology has been implemented. It includes 4 PEs which can be scaled
from 0.7 V to 1.0 V with frequencies from 125 MHz to 500 MHz at three distinct
PLs. By measurement of three neuromorphic benchmarks it is shown that the total
PE power consumption can be reduced by 75%, with 80% baseline power reduction
and a 50% reduction of energy per neuron and synapse computation, all while
maintaining temporary peak system performance to achieve biological real-time
operation of the system. A numerical model of this power management model is
derived which allows DVFS architecture exploration for neuromorphics. The
proposed technique is to be used for the second generation SpiNNaker
neuromorphic many core system
VLSI Implementation of a 2.8 Gevent/s Packet-Based AER Interface with Routing and Event Sorting Functionality
State-of-the-art large-scale neuromorphic systems require sophisticated spike event communication between units of the neural network. We present a high-speed communication infrastructure for a waferscale neuromorphic system, based on application-specific neuromorphic communication ICs in an field programmable gate arrays (FPGA)-maintained environment. The ICs implement configurable axonal delays, as required for certain types of dynamic processing or for emulating spike-based learning among distant cortical areas. Measurements are presented which show the efficacy of these delays in influencing behavior of neuromorphic benchmarks. The specialized, dedicated address-event-representation communication in most current systems requires separate, low-bandwidth configuration channels. In contrast, the configuration of the waferscale neuromorphic system is also handled by the digital packet-based pulse channel, which transmits configuration data at the full bandwidth otherwise used for pulse transmission. The overall so-called pulse communication subgroup (ICs and FPGA) delivers a factor 25–50 more event transmission rate than other current neuromorphic communication infrastructures
A RISC-V MCU with adaptive reverse body bias and ultra-low-power retention mode in 22 nm FD-SOI
We present a low-power, energy efficient 32-bit RISC-V microprocessor unit
(MCU) in 22 nm FD-SOI. It achieves ultra-low leakage,even at high temperatures,
by using an adaptive reverse body biasing aware sign-off approach, a low-power
optimized physical implementation, and custom SRAM macros with retention mode.
We demonstrate the robustness of the chip with measurements over the full
industrial temperature range, from -40 {\deg}C to 125 {\deg}C. Our results
match the state of the art (SOTA) with 4.8 uW / MHz at 50 MHz in active mode
and surpass the SOTA in ultra-low-power retention mode.Comment: accepted at ISOCC 202
Neuromorphic Hardware In The Loop: Training a Deep Spiking Network on the BrainScaleS Wafer-Scale System
Emulating spiking neural networks on analog neuromorphic hardware offers
several advantages over simulating them on conventional computers, particularly
in terms of speed and energy consumption. However, this usually comes at the
cost of reduced control over the dynamics of the emulated networks. In this
paper, we demonstrate how iterative training of a hardware-emulated network can
compensate for anomalies induced by the analog substrate. We first convert a
deep neural network trained in software to a spiking network on the BrainScaleS
wafer-scale neuromorphic system, thereby enabling an acceleration factor of 10
000 compared to the biological time domain. This mapping is followed by the
in-the-loop training, where in each training step, the network activity is
first recorded in hardware and then used to compute the parameter updates in
software via backpropagation. An essential finding is that the parameter
updates do not have to be precise, but only need to approximately follow the
correct gradient, which simplifies the computation of updates. Using this
approach, after only several tens of iterations, the spiking network shows an
accuracy close to the ideal software-emulated prototype. The presented
techniques show that deep spiking networks emulated on analog neuromorphic
devices can attain good computational performance despite the inherent
variations of the analog substrate.Comment: 8 pages, 10 figures, submitted to IJCNN 201
A 16-Channel Fully Configurable Neural SoC With 1.52 μW/Ch Signal Acquisition, 2.79 μW/Ch Real-Time Spike Classifier, and 1.79 TOPS/W Deep Neural Network Accelerator in 22 nm FDSOI
With the advent of high-density micro-electrodes arrays, developing neural probes satisfying the real-time and stringent power-efficiency requirements becomes more challenging. A smart neural probe is an essential device in future neuroscientific research and medical applications. To realize such devices, we present a 22 nm FDSOI SoC with complex on-chip real-time data processing and training for neural signal analysis. It consists of a digitally-assisted 16-channel analog front-end with 1.52 μ W/Ch, dedicated bio-processing accelerators for spike detection and classification with 2.79 μ W/Ch, and a 125 MHz RISC-V CPU, utilizing adaptive body biasing at 0.5 V with a supporting 1.79 TOPS/W MAC array. The proposed SoC shows a proof-of-concept of how to realize a high-level integration of various on-chip accelerators to satisfy the neural probe requirements for modern applications
A database accelerator for energy-efficient query processing and optimization
Data processing on a continuously growing amount of information and the increasing power restrictions have become an ubiquitous challenge in our world today. Besides parallel computing, a promising approach to improve the energy efficiency of current systems is to integrate specialized hardware. This paper presents a Tensilica RISC processor extended with an instruction set to accelerate basic database operators frequently used in modern database systems. The core was taped out in a 28 nm SLP CMOS technology and allows energy-efficient query processing as well as query optimization by applying selectivity estimation techniques. Our chip measurements show an 1000x energy improvement on selected database operators compared to state-of-the-art systems
- …